Convert

Foot per second squared to Metre per second squared

Exact answer: 1 ft/s² = 0.3048 m/s² (exact defined factor)

Foot per second squared and Metre per second squared describe the same quantity from the Acceleration family but come from different systems of units. The factor is defined exactly. Acceleration appears in physics, vehicle engineering and sensor datasheets.

Unit console

Convert units with formula, context and precision

UnitCloud is a local measurement lab for everyday work, engineering, IT, energy, mobility and design. Every conversion shows result, formula, base unit, rounding and the common mistake.

What do you want to convert?

From1 ft/s²

Result0.3048 m/s²

Factor1 ft/s² = 0.3048 m/s²

Source basisBIPM SI Brochure · NIST Guide to SI Appendix B · NIST CODATA fundamental physical constants

Examples

011 ft/s² = 0.3048 m/s²

Example value from the reference table. Internal calculation uses stored factors; display output is rounded.

02Common mistake

Lower-case g as acceleration (9.80665 m/s²) is not the gram. In engineering g usually means standard gravity; in commerce it means gram.

03Base unit: m/s²

1 ft/s² = 0.3048 m/s². Then the value is converted through the base unit m/s² into Metre per second squared.

Table

Foot per second squared to Metre per second squared
Foot per second squared	Metre per second squared
1	0.3048
5	1.524
10	3.048
32	9.7536
50	15.24
100	30.48

Formula

1 ft/s² = 0.3048 m/s². Then the value is converted through the base unit m/s² into Metre per second squared.

Sources

BIPM SI BrochureSI base units, prefixes and official SI context.NIST Guide to SI Appendix BNIST conversion-factor method and non-SI factors.NIST CODATA fundamental physical constantsExact defining constants such as the speed of light in vacuum.

Related conversions

Standard gravity to Metre per second squaredg → m/s²Acceleration Metre per second squared to Standard gravitym/s² → gAcceleration Metre per second squared to Foot per second squaredm/s² → ft/s²Acceleration Gal to Metre per second squaredGal → m/s²Acceleration

Search and practice paths

FormulaTableExamplesCommon mistakeEveryday/engineeringExcel/CSVBatch converterPrint view

AccelerationAcceleration and g-force Data rateReading internet speed correctly

Factor origin

Factors come from the stored source family and are not derived from rounded display values.

Rounding rule

UnitCloud keeps calculating with stored factors and rounds only the displayed output by selected precision.

When not to use

Do not use as the sole basis for official, medical, safety-critical or contractual decisions.

Citation

Citation note: UnitCloud, conversion with formula, sources reviewed: September 2026. Acceleration. Source basis: BIPM SI Brochure · NIST Guide to SI Appendix B · NIST CODATA fundamental physical constants.

Common questions

What is the factor for Foot per second squared to Metre per second squared?

1 ft/s² = 0.3048 m/s²

Which formula does Foot per second squared to Metre per second squared use?

1 ft/s² = 0.3048 m/s². Then the value is converted through the base unit m/s² into Metre per second squared.

What is the most common mistake?

Lower-case g as acceleration (9.80665 m/s²) is not the gram. In engineering g usually means standard gravity; in commerce it means gram.

When should I verify the result?

Do not use as the sole basis for official, medical, safety-critical or contractual decisions.